Supported Hardware
Choose a system to see its supported cabinets and I/O boards.
Raw Thrills
- Jamma cabinets:
- The Fast and the Furious
- The Fast and the Furious: Drift
- Fast & Furious SuperCars
- Super Bikes, Super Bikes 2
- H2Overdrive (including the lamp board and the VH2OSPEED02 speed and boost meter)
- Dirty Drivin'
- Nicktoons Nitro
- RIO cabinets:
- Super Bikes 2
- Fast & Furious SuperCars
- SnoCross
- Batman
- Pac-Man Chomp Mania
- Jurassic Park
- World's Largest Pac-Man
- The Walking Dead
- Cruis'n Blast
- Injustice
- Space Invaders Frenzy
- MotoGP
- Requires a USB port on the PC, and optionally an LPT port for the Raw Thrills 500-00037 steering motor
- Setup Video: Watch the setup video
Golden Tee
- Incredible Technologies Golden Tee cabinets:
- 2006
- 2007
- 2008
- 2009
- 2010
- 2011
- 2012
- 2013
- 2014
- 2015
- 2016
- 2017
- 2018
- 2019
- Newer and older years are not tested.
- Requires a USB port on a PC
Global VR (Nytric Board)
- Nytric USB I/O cabinets:
- EA Sports PGA Tour Golf
- PGA Tour Golf Championship II
- PGA Tour Golf Championship III
- PGA Tour Golf Challenge Edition
- PGA Tour Golf Team Challenge
- Need for Speed Underground
- Need for Speed GT
- Need for Speed Carbon upgrade cabinets
- EA Sports Madden Football (2-player)
- Dedicated Carbon cabinets use the GVR I/O Mini below
- Full trackball and driving configurations supported.
- Requires a USB port on a PC. Wheel force-feedback connections depend on the motor interface; check the setup guide.
Global VR (GVR I/O Mini)
- Dedicated cabinets that use the GVR I/O Mini:
- Need for Speed Carbon
- Twisted — Nitro Stunt Racing
- Redline Rampage
- Wheel, pedals, shifter, and cabinet lamps supported
- Force feedback uses the Immersion TouchSense wheel
- The Global VR motion seat is supported
- Need for Speed Carbon upgrade cabinets use the Nytric board above
- Requires a USB port on the PC
Taito Type X2 / X3 (Fast I/O)
- Fast I/O DMAC cabinets:
- Dariusburst: Another Chronicle
- Dariusburst: Another Chronicle EX
- NESiCAxLive Type X2 machines
- Type X3 cabinets:
- Gyrozetter
- Gunslinger Stratos
- Gunslinger Stratos 2
- Gunslinger Stratos 3
- Left 4 Dead: Survivors
- Lord of Vermilion III
- Lord of Vermilion IV
- Ultra Street Fighter IV
- Theatrhythm Final Fantasy: All-Star Carnival
- School of Ragnarok
- BlazBlue: Cross Tag Battle
- Fighting EX Layer
- The King of Fighters XIV
- Samurai Shodown (2019)
- Full setup info is shown when you fire up the app
- Falls back to JVS if Fast I/O is not available
Taito Type X4
- Type X4 cabinets:
- Densha de Go!!
- Love Live! School Idol Festival: After School Activity
- Love Live! School Idol Festival: After School Activity Next Stage
- Magicians Dead
- Magicians Dead Next Blazing
- Starwing Paradox
- Street Fighter V: Type Arcade
- Street Fighter 6: Type Arcade
- Requires a USB port on a PC
Sega Europa-R
- Europa-R cabinets:
- Sega Rally 3
- GRID
- Showdown
- Requires a USB port on the PC
- Force feedback uses the Sega FR-838-001UK Happ steering motor on a parallel port
All in one JVS Support
- Requires RS-485 → USB adapter
- Namco JVS Supported
- Mario Kart Arcade GP
- Mach Storm
- Star Wars: Battle Pod
- Wangan Midnight Maximum Tune 5
- Wangan Midnight Maximum Tune 5DX
- Wangan Midnight Maximum Tune 5DX+
- Wangan Midnight Maximum Tune 6
- Wangan Midnight Maximum Tune 6R
- Tekken 7
- Time Crisis 5
- Pokken Tournament
- Dead Heat
- Other Namco cabinets that use a JVS I/O board. System 357 and 369 cabinets use the USIO board below instead
- Taito JVS Supported
- Chase H.Q. 2
- D1GP
- Street Fighter IV
- Super Street Fighter IV
- The King of Fighters XII
- The King of Fighters XIII
- BlazBlue
- Wacky Races
- Elevator Action Death Parade
- Haunted Museum
- Other Type X2 cabinets wired to a JVS I/O board. Cabinets with the Fast I/O card use the Type X2 / X3 option above
- Sega JVS Supported
- Naomi and Naomi 2, including the 838-13683 USB board:
- Crazy Taxi
- The House of the Dead 2
- Virtua Tennis
- Virtua Fighter 4
- Marvel vs. Capcom 2
- Initial D Arcade Stage
- OutRun 2
- Confidential Mission
- The Typing of the Dead
- Triforce:
- F-Zero AX
- Lindbergh:
- OutRun 2 SP
- Virtua Fighter 5
- Virtua Tennis 3
- The House of the Dead 4
- Initial D Arcade Stage 4
- Initial D Arcade Stage 5
- Let's Go Jungle
- Sega Race TV
- R-Tuned
- Hummer
- Hummer Extreme
- RingEdge cabinets with the older JVS I/O board:
- Border Break
- After Burner Climax
- Hatsune Miku: Project DIVA Arcade
- Virtua Tennis 4
- Let's Go Island 3D
- Initial D Arcade Stage 6 AA
- Initial D Arcade Stage 7 AAX
- Initial D Arcade Stage 8 Infinity
- Operation G.H.O.S.T.
- Transformers: Human Alliance
- Sega 838-13683 boards can also plug in over USB. Pick Sega JVS / NAOMI (WinUSB) and the app can install the driver
- Sega driving cabinets use the 838-15069 motor drive board on a COM port for force feedback
- Naomi and Naomi 2, including the 838-13683 USB board:
- Other JVS Boards
- Other cabinets that speak JVS should work too
Namco USIO (System 357 / 369)
- System 357 / 369 cabinets:
- Tekken 6
- Tekken 6: Bloodline Rebellion
- Tekken Tag Tournament 2
- Tekken Tag Tournament 2 Unlimited
- Razing Storm
- Deadstorm Pirates
- Deadstorm Pirates Special Edition
- Dark Escape 3D
- Dark Escape 4D
- Dragon Ball Zenkai Battle Royale
- Gundam: Extreme Vs.
- Gundam: Extreme Vs. Full Boost
- Gundam: Extreme Vs. Maxi Boost
- Taiko no Tatsujin
- Sailor Zombie
- USB connection to the USIO PCB. DIP switch 2 must be OFF
- The app can install the WinUSB driver for you
- Razing Storm light guns work by mapping vJoy in TeknoParrot
- Full setup info is shown when you fire up the app
Sega IO4 (ALLS)
- 835-15257 USB I/O board. No extra driver. This is the ALLS cabinet I/O.
- ALLS cabinets:
- House of the Dead: Scarlet Dawn
- Fate/Grand Order Arcade
- maimai DX
- CHUNITHM SUPERSTAR
- CHUNITHM NEW, and later ALLS versions
- Ongeki
- Sega World Drivers Championship
- Soul Reverse
- Puyo Puyo eSports
- Virtua Fighter 5 Ultimate Showdown
- Dead or Alive 6
- Mario & Sonic at the Olympic Games Tokyo 2020 Arcade Edition
- WCCF Footista
- Wheel, light-gun, and button cabinets. Should auto detect, if not you can swap the board config type in board settings
- Full support for cabinet side lamps via the Sega 837-15070 LED driver
- The 837-15093 RGB strip (left, center, and right) is supported
- The 200-6275 scrolling marquee is supported
- Support for 838-15415 digital readout panel (speed, gear, and tacho)
- Force feedback uses the Sega 838-15069 motor drive board
Konami BIO2 (BETA)
- Konami BIO2 USB board. Windows already has the COM port driver, so nothing extra to install
- beatmania IIDX cabinets from IIDX 25 onward. Keys, turntables, sliders, start and effect buttons, and cabinet lamps
- Sound Voltex cabinets from Vivid Wave onward. Buttons, knobs, and button lamps. Choose Sound Voltex in the board options. IIDX is the default
- Requires COM port. You can change com port in bio2.ini if needed
Konami KFCA (BETA)
- Sound Voltex cabinets before Vivid Wave. Supports Buttons, knobs, volume and button lamps:
- SOUND VOLTEX BOOTH
- SOUND VOLTEX II -infinite infection-
- SOUND VOLTEX III GRAVITY WARS
- SOUND VOLTEX IV HEAVENLY HAVEN
- Requires COM port.
Konami P3IO (BETA)
- Konami P3IO for Dance Dance Revolution. Works with no konami driver, or with it also if you have it
- Dance Dance Revolution cabinets that use the P3IO.
- Both players' pads, start, and menu buttons supported
- Optional: pad arrow lights and bass neons use the Konami EXTIO board. Set its COM port in P3IO Options.