EMULATOR
Help & FAQ

Namco USIO setup

System 357 / 369 USB I/O

Connect the PCB

  1. Set DIP switch 2 OFF for normal USIO mode, then connect the board by USB.
  2. The device is VID 0B9A / PID 0910. Device Manager should show USIO PCB rev00 with DIP 2 off.
  3. Use the app’s driver installer or Zadig to bind WinUSB or libusbK to the USIO PCB. The default Windows USIO driver does not expose the bulk I/O needed by the app.

Use the virtual controllers

  1. Arcade IO Emulator reads the real board and publishes vJoy devices. For Razing Storm light guns, map vJoy 1/2 in TeknoParrot.
  2. RPCS3 uses emulated USIO. Do not pass the physical USIO USB device through to RPCS3.

Driver binding fails

  1. Confirm DIP 2, the hardware ID and the selected driver. The app’s guide suggests running as Administrator if driver binding fails.

Still need a hand?

Share your cabinet name, board model, Windows device/COM-port details and the app’s log with the community.

Ask in Discord